A broken zipper is a common problem that can occur on jackets, shoes, and other items of clothing. Fortunately, many zipper problems can be fixed by yourself, even without specialist tools. Here is a step-by-step guide on how to fix zippers on jackets and shoes, perfect for beginners.
1. Diagnosing the Slider Problem
Before you begin repairing, determine what the specific problem is with your slider. Here are the most common faults:
- Slider is stuck – the slider is difficult to move or is blocked completely.
- The zipper comes apart when closed – the zipper comes apart after closing, which may indicate damage to the zipper or its mechanism.
- Slider has come off track – the slider has come off the slider track and cannot be reinserted.
- Broken tooth – a missing tooth on one side may prevent the lock from closing properly.
2. A stuck zipper – how to fix it
A stuck slider is the easiest to fix. It can be caused by dirt, dust, or lack of lubrication.
-
Step 1: Cleaning the slider
Use an old toothbrush to gently clean the zipper of any dust or dirt. You can also use a cotton cloth dampened with soapy water to remove any dirt. -
Step 2: Lubricate the slider
To make the zipper slide more smoothly, use soap, candle wax, or a graphite pencil (running it along the teeth). Rub the chosen material along the entire length of the zipper and move the slider up and down a few times to evenly distribute the lubricant.
3. The zipper comes apart when closed
If the zipper closes but then immediately comes apart, the zipper may be loose. This can be fixed by tightening the zipper.
-
Step 1: Gently tighten the zipper
Use pliers or pliers to gently tighten the zipper. Grab the zipper from the side and tighten lightly, being careful not to crush it too much, which could damage it. -
Step 2: Testing the Slider
Move the slider up and down to check that the slider is holding properly. If the zipper still does not come apart, try tightening the slider a little. -
Step 3: Repeat the procedure if necessary
It may take a few tries to get the right grip. Just be careful not to overtighten the zipper.
4. The slider fell off the track – how to get it back
If the slider has fallen out of the zipper track, you can try reinserting it.
-
Step 1: Preparing the Slider Ends
Check the ends of the zipper for any damaged teeth or obstructions that could be blocking the slider. -
Step 2: Inserting the slider
Carefully insert the zipper tips into the zipper holes while holding the zipper in a vertical position. If the zipper does not slide smoothly, try gently adjusting the tips to fit perfectly into the zipper holes. -
Step 3: Securing the Lock End
To avoid the zipper from falling out again, sew or glue the zipper tip to prevent it from slipping off.
5. Broken or damaged tooth
In the case of a missing or damaged tooth, repair may be more complicated, but is still possible.
-
Step 1: Check the extent of damage
If one tooth is missing but the rest of the zipper is intact, you can try using the zipper as is, especially if the damage is at the bottom or top of the zipper. -
Step 2: Replacing the slider
Sometimes replacing just the slider (if it's broken) can fix the problem. You can buy a new slider of the right size and slide it onto the zipper using the method described above. -
Step 3: Professional lock replacement
If the damage is more severe (e.g. more teeth missing), the best solution may be to replace the entire zipper. You can do this yourself if you have a sewing machine, or take your jacket or shoes to a professional.
6. Repairing shoe zippers – tips
Repairing shoe zippers is similar to that of jackets, although it can be more challenging due to limited availability.
-
Stretching the Area Around the Zipper – If you’re having trouble accessing the zipper, try slightly stretching the leather or material around the zipper to better see what you’re doing.
-
Using small pliers – Smaller tools, such as small pliers, can be useful when crimping or inserting a zipper.
-
Zipper lubricants – Shoes are often more exposed to water and dirt, so it is worth protecting the zipper from moisture by using special zipper lubricants, which also prevent jamming.
7. Useful zipper repair tools
- Pliers or pliers – for gently crimping the zipper.
- Toothbrush or brush – for cleaning the lock.
- Soap or candle wax – to lubricate the lock.
- Needle and thread – to secure the zipper tip once the slider is inserted.
- Replacement sliders – available at haberdashery and tailor shops that fit your zipper size.
8. When should you see a specialist?
If none of the above methods work, or the zipper is severely damaged, you may want to consider visiting a tailor or shoemaker. A professional can replace the entire zipper or slider and provide a permanent repair, especially on valuable jackets or shoes.
With these simple steps and tools, you can fix most zipper problems yourself, extending the life of your clothes and shoes.